1. Read the safety precautions and the repair checklist.
2. Remove the following components:
• Bottom
• Battery
List of screws
O + M1.6 X 9.0L (2 pieces)
- Disassembling the ROG Ally screen module
- Remove the screw(s), then slightly lift the fan(s) and place them on the top edge of the chassis without removing the fan(s) completely.
3. Remove the adhesive
4. Disconnect the fan connector(s) and remove the fan(s).
Installation
- Reconnect the fan connector(s).
- Align and reattach the tape to secure the fan cable(s).
3. Align and install the fan(s).
4. Secure the fan(s) using the screw(s) you removed earlier.
5. Reattach the tape.
6. Install the components you removed in the "Before you begin" section.