Before you begin
1. Read the Safety Precautions and Pre-repair Checklist.
2. Remove the following components:
• Bottom
• Battery
• Fan Module
• I/O board (Analog sticks and haptic motors)
Screw list
O + M1.6 X 3.0L (8 pieces)
Disassembly
1. Disconnect the cable(s) from the motherboard.
2. Remove the screw(s).
3. Slightly lift the bumper button(s), then remove the motherboard from the chassis in the orientation shown in the illustration below.
Reassembly
1. Slightly lift the bumper button(s), then align and install the motherboard in the orientation shown in the illustration below.
2. Reconnect the cable(s) to the motherboard.
3. Secure the motherboard using the screw(s) you removed earlier.
4. Install the components you removed in the Before you begin section.